Bigfoot Tracker Embroidered 3″ Patch

Description

DESCRIPTION:

3 Inch Round Embroidered Iron on patch with Heatbond ultra hold backing attached.

Patches can be attached to a variety of garments or items. They come with an Iron on backing but can also be sewn on if you prefer. If you choose to Iron on, make sure that the item or garment is a fabric that does not have a low melting point. Items such as vinyl, nylon and leather products are not suitable for iron on application but can be sewn on.

Shipping is $1.00 for standard USPS shipping with no tracking provided. There is an option for upgraded USPS shipping for a larger fee that provides tracking information on your shipment.

Iron on application Instructions:

Start by setting your iron to the cotton setting and let heat up for 4-5 minutes.
Iron the garment or item that you will be applying the patch onto.
Peel off the white paper from the back of the patch.
Place the patch onto the garment or item aligned to your liking with the embroidered/ design side facing up.
Place a cloth or thin towel over the patch and using firm slow circular motions press for 30 seconds.
Turn the item (if possible) or garment inside out and repeat the previous step again.
Let cool and test patch to verify adhesion, if patch lifts repeat all processes.